Do treści strony
compare-box

Rockboard QUAD 4.2 B with Gig Bag

105 Oceny klientów

4.7 / 5
Oceń artykuł

montaż

wykończenie

61 Opinie

Rockboard QUAD 4.2 B with Gig Bag
639 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
1
google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Generally very good with 2 drawbacks
Bluez_Freak 05.02.2021
This pedalboard is very good with innovative design compared to pedaltrains or palmer (which I also have).

However the biggest problem I faced was to install the MOD1 because there are 2 vertical beams underneath which make it impossible to screw the MOD without removing these beams. And if you remove these beams is very difficult to screw them back again to the board without proper tools (in my opinion the tools provided are a joke, as you need "real" tools and a LOT of patience to install the MOD and the beams back to their place).

Another problem was that the screws quality (for the MOD) is rather cheap so be careful not to overtighten - one of them simply broke and probably this cheap quality is the reason they supply you with extra screws and nuts.

Other than the above 2 problems it is very good and light and I like a lot the fact you can hide the cables underneath more easily than other pedalboards (you can wrap them around the two beams or insert the cables inside them) and keep everything tidy and out of sight.
This pedalboard is very good with innovative design compared to pedaltrains or palmer (which I also have).

However the biggest problem I faced was to install the MOD1 because there are 2 vertical beams underneath which make it impossible to screw the MOD without removing these beams. And if you remove these beams is very difficult to screw them back again to the board without proper tools (in my opinion the tools provided are a joke, as you need "real" tools and a LOT of patience to install the MOD and the beams back to their place).

Another
This pedalboard is very good with innovative design compared to pedaltrains or palmer (which I also have).

However the biggest problem I faced was to install the MOD1 because there are 2 vertical beams underneath which make it impossible to screw the MOD without removing these beams. And if you remove these beams is very difficult to screw them back again to the board without proper tools (in my opinion the tools provided are a joke, as you need "real" tools and a LOT of patience to install the MOD and the beams back to their place).

Another problem was that the screws quality (for the MOD) is rather cheap so be careful not to overtighten - one of them simply broke and probably this cheap quality is the reason they supply you with extra screws and nuts.

Other than the above 2 problems it is very good and light and I like a lot the fact you can hide the cables underneath more easily than other pedalboards (you can wrap them around the two beams or insert the cables inside them) and keep everything tidy and out of sight.
montaż
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
g
Nice product but a bit weighty
gio10 02.04.2019
The pedalboard is really well done and robust. Just a bit weighty. I should have consider a flight case instead of the soft bag that partially protect the pedals. Accessory are a bit expensive (ex patchbay). Overall I?? quite happy with it.
montaż
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
q
Pleased
quango 26.10.2018
+ MODs keep cables tidy

- Installation of a MOD leaves little room for a power brick in the middle bay. There should be extra mounting holes for The Tray in the outer bays.
montaż
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MV
Magic Viking 24.07.2023
Works well for a TC Helicon Voicelive 3, Line6 HX stomp and a Morningstar MC8. I could even add my Singular Sound BeatBuddy to it.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Game changer
Palladio 26.05.2021
I ditched my Pedaltrain board for this one and am not looking back! The spacing is so much better, allowing for more sleek cable management, but above all better placing of smaller pedals. The supports underneath help a lot with cables too. The possibility to mount a patch bay underneath is absolutely brilliant. 100% satisfied by this board!
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
HB
It's what you expect from the pedalboard.
Honest Bear 16.07.2023
Quality and to a certain point well thought out product. It does look sturdy and reliable. Bag is more than good enough. You will however have problems mounting that Rockboard MOD 1 V2 TRS & XLR Patchbay because the screw holes are just under those reinforcement vertical bars and you'll need to remove them. Also the space beneath for for your power is then limited and I struggled to put Strymon Zuma but at the end managed with the help of rockboard tray. Good thing about this pedalboard is that you have so much additional gimmicks you can buy for it like cable holders that just fit perfectly. Best one I've owned but as I said before. Prepare your screwdrivers and wrenches.
Quality and to a certain point well thought out product. It does look sturdy and reliable. Bag is more than good enough. You will however have problems mounting that Rockboard MOD 1 V2 TRS & XLR Patchbay because the screw holes are just under those reinforcement vertical bars and you'll need to remove them. Also the space beneath for for your power is then limited and I struggled to put Strymon Zuma but at the end managed with the help of rockboard tray. Good thing about this pedalboard is that you have so much additional gimmicks you can buy for it like cable
Quality and to a certain point well thought out product. It does look sturdy and reliable. Bag is more than good enough. You will however have problems mounting that Rockboard MOD 1 V2 TRS & XLR Patchbay because the screw holes are just under those reinforcement vertical bars and you'll need to remove them. Also the space beneath for for your power is then limited and I struggled to put Strymon Zuma but at the end managed with the help of rockboard tray. Good thing about this pedalboard is that you have so much additional gimmicks you can buy for it like cable holders that just fit perfectly. Best one I've owned but as I said before. Prepare your screwdrivers and wrenches.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
Best for the buck
Swords 02.08.2023
Great, everything in its place. Sturdy, solid, nice design, affordable
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Great value piece of kit
PhilVrV 24.08.2023
Had a Harley benton board for a few years but one off the feet has now sheared off. This rockboard however us a very well made piece off kit and with the optional accessories it stands out in a crowd.

Compare this to the pedaltrain range and you will see that this cannot be beaten on price or quality.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
OK
Good concept let down by poor quality control and information
Owen K. 29.07.2024
The USP of the Rockboard is that you can fit mod panels, right? Well good news - the Warwick team painted the inside of the screw threads that accept the mod boards so you can't actually screw anything in there without cross threading. I had to use a tap and die set to cut the paint out and then it was fine.

The board flexes under pressure, so if you're say pushing hard on a wah that has a switch under it, the top of the board will bend down slightly.

Oh and don't buy the Rockboard XLR cables that say they'll fit in the holes/slats - I assume they were measured to fit in an unpainted board, but when you try they actually scrape the paint off.
The USP of the Rockboard is that you can fit mod panels, right? Well good news - the Warwick team painted the inside of the screw threads that accept the mod boards so you can't actually screw anything in there without cross threading. I had to use a tap and die set to cut the paint out and then it was fine.

The board flexes under pressure, so if you're say pushing hard on a wah that has a switch under it, the top of the board will bend down slightly.

Oh and don't buy the Rockboard XLR cables that say they'll fit in the holes/slats - I assume
The USP of the Rockboard is that you can fit mod panels, right? Well good news - the Warwick team painted the inside of the screw threads that accept the mod boards so you can't actually screw anything in there without cross threading. I had to use a tap and die set to cut the paint out and then it was fine.

The board flexes under pressure, so if you're say pushing hard on a wah that has a switch under it, the top of the board will bend down slightly.

Oh and don't buy the Rockboard XLR cables that say they'll fit in the holes/slats - I assume they were measured to fit in an unpainted board, but when you try they actually scrape the paint off.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Perfect size for 10-14 pedals
JeanThomas 14.12.2022
If you have around 10-14 pedals this pedalboard is a good match. I love the fact that it is angled for easier pedal access, it's easy also to have your cables running nicely below it and there is plenty of room to hide your power brick under it as well. Good quality and good looking!
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Rockboard QUAD 4.2 B with Gig Bag