Do treści strony
seventy years logo
Thomann świętuje rocznicę! Dziękujemy za współpracę! Odkryj nasze oferty rocznicowe już teraz. Do ofert

Thon Rack Panel 1U 8XLR

996

Panel szafy rack

  • Rozmiar: 1 U, 19"
  • Z otworami dla standardu 8x D
  • Kształt litery U
Produkt dostępny od Marzec 2002
Numer artykułu 153746
Jednostka sprzedaży 1 szt.
Rack Units 1 U
Type 19"
35 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 18.09.
1

996 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

260 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Works as happy cable router as well
Liukke 28.02.2022
Didn't use it for installing XLR connectors, I just have 8 cables that from the bottom rack need to reach the top one and they all have their pass-through slot.

It makes my rack look much cleaner now.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
Thick metal, sturdy panel
KRNFL69WR 22.08.2019
This panel is made of pretty much thick metal - it's enough, so it won't flex, or move.

Bought it for a bit different purpose than mounting in a rack - I've made a "patch panel" for a pedalboard from it. Paired it with neutrik lockable connectors. This also helped to get rid of some cable clutter across pedalboard, connecting your in and out, fx loop send and return, and sometimes trigger signals to act as a footswitch for the amp. Put a PowerCON connector there too, so setting up would take less time.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Does the job
Anonimowy 21.02.2015
It's a good panel, it fits perfectly to the rack and takes the connectors very well too. A couple of niggles though ( and they are just niggles), there is a very slight flex in the panel when connecting stuff, mostly the middle sockets and it is very slight but there all the same, so not too sure how that will hold up over time. The other is depending on your ocd levels, it doesn't bother me but l did notice it , is that the two fixing holes for the screws are fractionally and l do mean factionally out so the sockets are pulling clockwise by a hair when fixed. Personally for the price l think this is a great panel and if the flexing doesn't become an issue six months down the line l'll happily come back and upgrade to five stars.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Good XLR rack panel for light or occasional use, if you can live with some flex
LutherD 07.09.2024
I use this XLR rack panel for an amp rack. Soldered 4 Neutrik XLR (1 panel) and 4 speakon (2nd panel) connectors in it, left the others empty (spaced 2 apart) to keep some air flow going.

The XLR and speakon tolerances are fine and my neutrik female XLR and Speakon connectors fit quite well.

However, the panel has some flex to it. especially in the middle. I use this with 2 amp racks that are mostly for installation work, so connectors only occasionally need to be reconnected, for this kind of use this is fine. I can be careful when connecting or disconnecting cables.

If I was making a rack case for daily use, I would want something sturdier, that wouldn't flex. I would not trust this for the hard life on the road.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie