Dzięki naszym plikom cookie chcielibyśmy zaoferować najlepsze możliwe doświadczenia zakupowe wraz ze wszystkim, co się z tym wiąże. Obejmuje to na przykład odpowiednie oferty, spersonalizowane reklamy i zapamiętywanie preferencji. Jeśli Ci to odpowiada, po prostu udziel zgody na używanie plików cookie do preferencji, statystyk i marketingu, klikając „W porządku!” (pokaż wszystko) Zgodę można wycofać w dowolnym momencie za pośrednictwem ustawień plików cookie (here)
Black TUSQ XL Nut for 6-String Acoustic and Electric Guitars
Right-handed version
Made of Black TUSQ
Pre-scored
Flat bottom
PTFE impregnation improves tuning stability and string life
Balanced sound with increased overtone content
String spacing E to E: 34.26 mm (1.349")
Dimensions (L x W x H): 42.05 x 6 x 7.69 mm (1.656" x 0.236" x 0.302")
Colour: Black
Note: All Graph Tech nuts and saddles are slightly longer and wider to ensure a perfect fit on the instrument. Excess material can easily be removed with fine sandpaper.
Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.
Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".
So I wanted to replace the plastic nut on my HB HWY-25BKS which is a beast of a machine. I learned from this experience that not all guitar nuts are made the same. The nut on the HWY is quite a bit bigger on the bottom (around 1.5mm I'd say) compared to this Graphtech one. So I had to use a bunch of wood glue at the bottom to artificially boost the height. Then comes in this nut, which fits perfectly width-wise. The only thing I haven't learned yet is if this nut is meant for a 12 inch fretboard radius like some other nuts, or not (maybe nuts don't even need to care about fretboard radius). I have mostly set up mine based on eye-feel so i dont know if this fits perfectly for a 14-inch radius originally.
Perfect upgrade for my Harley Benton self-build single cut.
Andy Fereday 03.01.2024
I wanted to change the nut on my self-build guitar. I had ruined the one that came with the guitar by filing one slot too deep. I was worried about changing the nut as all the youtube and self-build forums advise it is a difficult task.
I actually bought two of these as I wanted a reserve in case I damaged the first installation but as it turned out, I didn't need the second. It fit the slot perfectly. Only a small amount of adjustment was needed for the string slots and it has improved the intonation immeasurably. All-in-all I'm very happy.