Do treści strony
seventy years logo
Thomann świętuje rocznicę! Dziękujemy za współpracę! Odkryj nasze oferty rocznicowe już teraz. Do ofert

Dietrich Parts String Butler V3 BK

90

Hardware to improve the tuning stability of electric guitars and steel-string guitars

  • Designed for guitars with 3L / 3R headstock machine head configuration
  • Adjusts the position of the A, D, G, B strings to correct the string routing through the nut slots , thus preventing the guitar strings from getting stuck
  • Greatly improves the tuning stability of your guitar and increases the sustain
  • Keeps the tuning of the strings even during very intense guitar playing (also copes with extreme bends)
  • Fast and easy installation
  • Version V3 with minimum post distance 35 mm / maximum post distance 58 mm
  • Colour: Black

Note: Not compatible with machine heads with bushings

Produkt dostępny od Luty 2018
Numer artykułu 432425
Jednostka sprzedaży 1 szt.
168 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 6.11.
1

90 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

66 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
H
Saved my ES 355
HKHKHK 16.02.2020
I have a beautiful but difficult ES355, the difficulty being the (not uncommon) lack of tuning stability of the G and D strings, particularly under bending.

I played the guitar in the shop a couple of times before buying it, but I think that since I didn't own it at the time I was a bit gentle with the bends and didn't strum so hard, so the problem only became apparent after I got the guitar home. I was pretty crushed. I'm not an advanced enough player to "play around" the tuning issues and it was distracting me.

The String Butler is amazing. By straightening the 4 inner string pulls, the tuning is much better. Gibson necks still have a fairly sharp break, but if you are only noticing the tuning problems in the D and G, it's ikely the angled pull rather than the break that's causing the problem.

I do have a slight reservation with covering over part of the beautiful mother of pearl inlay on the 355 headstock, but knowing my 355 is now as stable as my Fender is a wonderful result.
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P&
Saving your Gibson!
Plexi's & gibsons 29.11.2018
If you have a Gibson and you like to do a ton of bends this thing is a lifesaver!

Pros:
It gives your strings a straight string pull and also fixes the headstock angle slightly. I use it on a Gibson SG and the thing stays in tune for days now!

It's easy to install if you have the right tuners (with screw in bushings).

Not a permanent mod.

Cons:
The look is a little weird at first. But if you like your Gibson to stay in tune and you've got a good lubricated nut, locking tuners. This is the only thing left to do!

You'll need a Gibson with tuners with screw in bushings (Grovers, new style klusons,..). Classic klusons with push in bushings will not allow you to install this unless you screw it in.

Conclusion:
If you can dig the look and want your Gibson to stay more in tune this works great! Easy to install and play more!
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Easy to fit and works well when used with a trem
Ands 15.03.2023
Installation was easy (remember to use the small plastic washers so you don't scratch your headstock!), and it gives arrow-straight string pull over the but on my Gibson LP 2020 Classic.
I had fitted a Bigsby and wanted better tuning stability and had seen these and thought for the price it couldn't hurt to try.

If you're bothered over the aesthetic that's a shame, it was never going to be an invisible modification, but it's a great tool for improving Straight string pull across the nut.
My LP nut had been cut straight; strings not angled towards the respective tuners, so instead of getting a new nut, this was the cheaper and easier option.

Solid build but doesn't add any noticeable weight to the headstock end.

There is a clear version if you absolutely have to see the Les Paul signature or other headstock adornment, but for me the metal one is fine.

It does what it says, fits easily and solidly and is a great addition to LP type guitars is using a trem.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
n
Well built and reduces the G string getting out of tune
nschutten 16.09.2024
It's not the perfect solution and may look a bit odd on your headstock, but it definitely helps reduce the G string getting out of tune.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie