Dzięki naszym plikom cookie chcielibyśmy zaoferować najlepsze możliwe doświadczenia zakupowe wraz ze wszystkim, co się z tym wiąże. Obejmuje to na przykład odpowiednie oferty, spersonalizowane reklamy i zapamiętywanie preferencji. Jeśli Ci to odpowiada, po prostu udziel zgody na używanie plików cookie do preferencji, statystyk i marketingu, klikając „W porządku!” (pokaż wszystko) Zgodę można wycofać w dowolnym momencie za pośrednictwem ustawień plików cookie (here)
Powerbar power supply with 8 outputs for Palmer Pedalbay 40
Can be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar
Output 1-6: 9V DC @ max. 300 mA (individually isolated)
Output 7-8: 9/12 / 18V DC @ max. 500 mA (individually isolated)
Max. Total power: 2000 mA
Power supply with a 12 V DC power adapter (included in delivery)
Dimensions (W x D x H): 450 x 50 x 24 mm
Weight: 650 g
Incldues cable from 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector: 5 pieces with a length of 16 cm and 9 pieces with a length of 60 cm
Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.
Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".
This is not correct and not honest as the pedal board length is 45 cm and the WT PB 40 is 45,5 cm so I had to adjust by drilling new hole as the pedal board frame was deformed, (longer at the top and shorter at the bottom), so the screw hole were not in place anymore.
NO it cannot be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar as they say.
This is a nice power supply that sits beautifully in my pedal rack and delivers plenty of power. I had a custom pedal that required a little more than the rated amperage and it works without a problem. The original power supply for the custom pedal was a constant nuisance, so this has worked better than expected for me.
I bought this one with the Harley Benton SpaceShip 40 bundle to power a Boss RC500 looper, a tc-e quintessence and a ehx oceans 11.
The fit in the pedalboard is REALLY tight. I had to unscrew not only the bar I had to remove but also the next one to allow me to force it a bit into place (no bending the pedalboard). Screwed right back ok.
Power cables of different length, I like it.
Powers correctly my pedals, no umm, invisible power solution. Thing that they could do better is the installation instructions. Like for the protective plate. It's a bit lacking and therefore confusing. (Its just screws so you can't really damage it but would have been faster with proper instructions)
The product is excellent in design as it fits the pedalboard perfectly and the cables look nice and organized, It has sufficient outputs for almost any pedal configuration and it offers 2 outputs with 3 voltage modes (9V, 12V or 18V) making this a great and versatile option.
Overall I am very satisfied with this power supply and would recommend it to any musician who is into analog pedals and live performance.