Dzięki naszym plikom cookie chcielibyśmy zaoferować najlepsze możliwe doświadczenia zakupowe wraz ze wszystkim, co się z tym wiąże. Obejmuje to na przykład odpowiednie oferty, spersonalizowane reklamy i zapamiętywanie preferencji. Jeśli Ci to odpowiada, po prostu udziel zgody na używanie plików cookie do preferencji, statystyk i marketingu, klikając „W porządku!” (pokaż wszystko) Zgodę można wycofać w dowolnym momencie za pośrednictwem ustawień plików cookie (here)
Specially developed non-locking studs for best sound transmission
Specifically shaped solid brass string saddles for improved sound development, dynamics, sustain and overtone behaviour
9 mm wide intonation adjustment range
Closed string guide for effortless string change
Rectangular ball-end mount to prevent the string ends from unwinding
Material: Zinc
Saddles: Brass
Total string spacing: 52.5 mm
Single string spacing: 10.5 mm
Dimensions (L x W x H): 99.9 x 23.9 x 12.9 mm
Total hole/bolt spacing: 81.8 mm
Weight: 90 g
Schaller no. 12350200.02
Finish: Chrome
Includes 1 pair of t-nuts and non-locking height adjustment screws (M8 metric), 1 Signum spanner (if retrofitting to locking studs is required - optionally available), 2 pairs of grub screws of different lengths (6 mm / 10 mm - 6 mm length is already pre-assembled) and 1 Allen key for grub screws
Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.
Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".
If you intend this bridge for a Gibson guitar, please beware! The set only comes with screws and bushings in metric sizes. If you want to use this bridge on a Gibson, you need to buy an additional set of locking screws in inches. For around 20 Euros on top of the price of the bridge, this makes for an excessively expensive bridge alternative.
Good sustain but one of the saddles comes off when intonating
TudorVisan 29.06.2020
I used this to replace the stoptail on my PRS SE Custom 24. The fit is perfect and there is a noticeable increase in sustain! However, when intonating one the strings, instead of moving the saddle forwards and back, the screw simply unscrewed itself from the bridge while the saddle sat still. This happened both with and without string tension on the saddle. To work around this issue I detensioned the string, turned the screw as much as I thought was necessary then, using the blunt end of some pliers, pushed the screw back into the bridge. The guitar is now intonated and, to be fair, none of the other saddles had any problems and sustain is good all-round.
I used this to replace the stoptail on my PRS SE Custom 24. The fit is perfect and there is a noticeable increase in sustain! However, when intonating one the strings, instead of moving the saddle forwards and back, the screw simply unscrewed itself from the bridge while the saddle sat still. This happened both with and without string tension on the saddle. To work
I used this to replace the stoptail on my PRS SE Custom 24. The fit is perfect and there is a noticeable increase in sustain! However, when intonating one the strings, instead of moving the saddle forwards and back, the screw simply unscrewed itself from the bridge while the saddle sat still. This happened both with and without string tension on the saddle. To work around this issue I detensioned the string, turned the screw as much as I thought was necessary then, using the blunt end of some pliers, pushed the screw back into the bridge. The guitar is now intonated and, to be fair, none of the other saddles had any problems and sustain is good all-round.
I got this to replace the wrap around bridge on a Harley Benton CST-24 , as the G string could not be intonated properly without then putting the B string out of tonation. This unit solves the problem nicely by having adjustable intonaition on every string.
