Do treści strony
compare-box

the t.amp Proline 3000

367

Końcowy wzmacniacz mocy

  • 2x 1500 W przy 4 Ω
  • 2x 1100 W przy 8 Ω
  • 2x 1800 W przy 2 Ω
  • Stabilność 2 Ω
  • Wbudowany ogranicznik
  • Softstart
  • Wszystkie obwody zabezpieczające
  • Wentylatory z regulacją temperatury
  • Przełącznik Ground Lift
  • Transformator o dużych wymiarach
  • Format szafy typu rack 19" z 3 jednostkami wysokości
  • Wymiary: 482 x 480 x 132 mm
  • Waga: 37 kg
Produkt dostępny od Listopad 2004
Numer artykułu 168990
Jednostka sprzedaży 1 szt.
Power (4 Ohms) per Channel 1500 W
Channels 2
Rack Units 3 U
Amp Class Class AB
2 Ohm stable Yes
DSP/Crossover No
Convection cooling No
Width in mm 483 mm
Depth in mm 461 mm
Height in mm 132 mm
Weight 37 kg
Bridged Mode 1
Input XLR 1
Jack Input 6,3 sym. 1
Parallel Input 1
Link Out No
Output Speaker Twist 1
Pokaż więcej
2 799 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
1

367 Oceny klientów

4.8 / 5
Oceń artykuł

obsługa

właściwości

dźwięk

wykończenie

205 Opinie

Hn
Very good
Hoa nguyen 01.10.2024
Thank you, your products are very good, I also support many other products.
obsługa
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

A
dobry
Anonimowy 25.10.2016
Bardzo dobry produkt, bardzo dobra cena
obsługa
właściwości
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Heavy but impressive.
Anon123 15.05.2013
Everything about this amplifier is heavy, from its physical weight to the sound it produces.

I bought this amplifier to run bass (2 drivers per channel) and it more than met my expectations. Running at 4 ohms per channel the amplifier more than meets its rated spec and pushes serious sub bass with apparent ease.

The inputs on the amplifier are quite sensitive so if using a Behringer Ultradrive with a '0dB' reference equivalent to +22dBu it's worth dropping a compressor in between the Ultradrive and the amplifier to act as a more reliable limiter. AVOID CLIPPING THIS AMPLIFIER! The clip circuitry is not the best and it can cook speaker coils fairly rapidly if the amplifier isn't kept under control.

The physical weight of the amplifier is a down side but then again its older technology which is how they can achieve such performance at the price.

Highly recommended but use with care to avoid blown speakers and hernias!
Everything about this amplifier is heavy, from its physical weight to the sound it produces.

I bought this amplifier to run bass (2 drivers per channel) and it more than met my expectations. Running at 4 ohms per channel the amplifier more than meets its rated spec and pushes serious sub bass with apparent ease.

The inputs on the amplifier are quite
Everything about this amplifier is heavy, from its physical weight to the sound it produces.

I bought this amplifier to run bass (2 drivers per channel) and it more than met my expectations. Running at 4 ohms per channel the amplifier more than meets its rated spec and pushes serious sub bass with apparent ease.

The inputs on the amplifier are quite sensitive so if using a Behringer Ultradrive with a '0dB' reference equivalent to +22dBu it's worth dropping a compressor in between the Ultradrive and the amplifier to act as a more reliable limiter. AVOID CLIPPING THIS AMPLIFIER! The clip circuitry is not the best and it can cook speaker coils fairly rapidly if the amplifier isn't kept under control.

The physical weight of the amplifier is a down side but then again its older technology which is how they can achieve such performance at the price.

Highly recommended but use with care to avoid blown speakers and hernias!
obsługa
właściwości
dźwięk
wykończenie
25
2
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Z
I am well pleased!
ZsoltV 01.05.2015
I have to admit that i was afrait of that im going to buy an other cheap amplifier with overestimated and overrated capabilities. Now i have been using this amp for months and i have to tell that im not too gentle to it. Im driving 2x2000W rms double 18" bass bin each side (4 ohms) or 2x double 15" 1000w x2 each side (2 ohms) I was like if it fails i will live with the warranty, but it never lets me down. Even on 2 ohms, the performance wouldnt drop, and wouldnt overheat. Yes, it is a very heavy amp to carry around, but if you want serious power to come out of it, you have to deal with!!!
I have to admit that i was afrait of that im going to buy an other cheap amplifier with overestimated and overrated capabilities. Now i have been using this amp for months and i have to tell that im not too gentle to it. Im driving 2x2000W rms double 18" bass bin each side (4 ohms) or 2x double 15" 1000w x2 each side (2 ohms) I was like if it fails i will live with
I have to admit that i was afrait of that im going to buy an other cheap amplifier with overestimated and overrated capabilities. Now i have been using this amp for months and i have to tell that im not too gentle to it. Im driving 2x2000W rms double 18" bass bin each side (4 ohms) or 2x double 15" 1000w x2 each side (2 ohms) I was like if it fails i will live with the warranty, but it never lets me down. Even on 2 ohms, the performance wouldnt drop, and wouldnt overheat. Yes, it is a very heavy amp to carry around, but if you want serious power to come out of it, you have to deal with!!!
obsługa
właściwości
dźwięk
wykończenie
9
1
Zgłoś nadużycie

Zgłoś nadużycie

Czy wiesz że?

Poradniki
PA-Amps
Pobierz
User manual